H-530

H-530

Introduction

The H-530 is a simple Nozzle which is a variation of the nonclog principle. Nozzle consists of two parts, the Body which contains the inlet pipe connection and the orifice; and a Cap which forms the bottom of the Swirl Chamber. The solid cone spray is uniformly distributed over the entire area of coverage. Typically used where a right angle connection is required for gas scrubbing, rinsing, washing, quenching and dust control.

Details

  • Material: Brass. Available as a special in any machinable material.
  • Spray Angle: 80° at 40 PSI.
  • Pipe Connection: 1/4″ NPT.
  • Drawing, Capacity:

     

    • H-530
Tags:
Data sheet
Published in Water Nozzles

Related items

  • H-837 solid jet nozzles
    October 18, 2016

    The H-837 Nozzles produce a solid unbroken stream with a defined jet length before breakup of the liquid occurs. Useful for cleaning and cutting operations. To maximize stream length, mounting close to tees should be avoided as the turbulence produced from “turning the corner” disrupts smooth stream.

  • B-25 large capacity AAMA kit
    October 18, 2016

    The B-25 Nozzles are of two piece construction with large tangential metering slots in the internal Disc to give a nonrestricted flow with a uniform “Solid” distribution. For special applications, a hollow cone spray can be produced from this same design. These Nozzles with high flow rates and coarser sprays are used in gas scrubbing, adsorption towers, brine spraying, and chemical and industrial processing.

    AAMA - Water test kit 

    The AAMA KIT Water test kit includes:

    (1) B-25 6.030 W/1/2″ FNPT
    (1) 3/4″ Globe valve
    (1) 3/4″ Garden hose adaptor
    (1) 0-60 PSI Pressure gauge
    (1) Case Fully assembled and ready to use!

     

  • H-535
    March 29, 2016

    The H-535 is a single nozzle, one piece. The unique “V” of the oval hole milling and produce a very thinsheet of high cutting speed was found to be ideal for the car wash, commercial dish washers and other applications where speed is important aerosol.

  • F-94
    March 29, 2016

    The F-94 Nozzle is available in a wide range of spray angles for many diverse applications. A unique spirally milled core or “disc” produces a high velocity spinning action that gives a solid cone distribution of medium atomization. The tip has a straight machine thread for use with a male or female adaptor with NPT connections. This Nozzle is particularly successful for dust suppression, industrial washers, coal washing and the production of carbon black.