B-25 large capacity AAMA kit

B-25 large capacity AAMA kit

Introduction

The B-25 Nozzles are of two piece construction with large tangential metering slots in the internal Disc to give a nonrestricted flow with a uniform “Solid” distribution. For special applications, a hollow cone spray can be produced from this same design. These Nozzles with high flow rates and coarser sprays are used in gas scrubbing, adsorption towers, brine spraying, and chemical and industrial processing.

AAMA - Water test kit 

The AAMA KIT Water test kit includes:

(1) B-25 6.030 W/1/2″ FNPT
(1) 3/4″ Globe valve
(1) 3/4″ Garden hose adaptor
(1) 0-60 PSI Pressure gauge
(1) Case Fully assembled and ready to use!

 

Details

  • Material: Brass is standard with 1/2″ NPT. Also available in any machinable material on request.
  • Spray Angle: 80° at 40 PSI.
  • Pipe Connection: 1/2″ NPT
  • Drawing, Capacity:

     

    • Capacities_B-25
    • b-25
Tags:
Data sheet
Published in AAMA Test Nozzles

Related items

  • H-530
    October 23, 2016

    The H-530 is a simple Nozzle which is a variation of the nonclog principle. Nozzle consists of two parts, the Body which contains the inlet pipe connection and the orifice; and a Cap which forms the bottom of the Swirl Chamber. The solid cone spray is uniformly distributed over the entire area of coverage. Typically used where a right angle connection is required for gas scrubbing, rinsing, washing, quenching and dust control.

  • F-94
    March 29, 2016

    The F-94 Nozzle is available in a wide range of spray angles for many diverse applications. A unique spirally milled core or “disc” produces a high velocity spinning action that gives a solid cone distribution of medium atomization. The tip has a straight machine thread for use with a male or female adaptor with NPT connections. This Nozzle is particularly successful for dust suppression, industrial washers, coal washing and the production of carbon black.