H-261(-CJ)

Introduction

The H-261 direct pressure operated Nozzle produces a very fine hollow cone spray similar to the F-80 Nozzle. However, it has a 1/4″ male NPT thread, so no adaptor is needed, and it can be connected directly to a 1/4″ Tee. Material: All Brass, with 120 mesh Monel Strainer. Primary use is at snow cannons or spray racks.

The H-261-CJ is the same general construction as the H-261 Nozzle. This version includes a “Center Jet” through the middle of the swirler which produces a Solid Cone Spray and somewhat coarser atomization. It has proven extremely successful in commercial dish washers.

Details

  • Material: Brass
  • Spray Angle: 30°,45°, 60°, 80°,90°. Sizes #3.0 to #9.50 available in 100°. All ratings are at 40 PSI. CJ: 80° at 40 PSI
  • Pipe Connection: 1/4″ NPT male
  • Drawing, Capacity:

     

    • Capacities_H-261
    • H-261-CJ
    • H-261

Related items